Roland Sound Canvas SC-8820, Owner'S Manual

Page: 55 / 192

55
Effects
Effects that broaden the sound (chorus type)
16: Hexa Chorus [01H, 40H]
Hexa-chorus uses a six-phase chorus (six layers of chorused
sound) to give richness and spatial spread to the sound.
fig.9-17
Pre Dly (Pre Delay Time) 0–100ms [1 (40 03 03)]
Adjusts the time delay from when the direct sound begins
until the processed sound is heard.
+Rate 0.05–10.0 [2 (40 03 04)]
Adjusts the rate of modulation.
Depth 0–127 [3 (40 03 05)]
Adjusts the depth of modulation.
Pre Dly Dev (Pre Delay Deviation) 0–20 [4 (40 03 06)]
The Pre Delay is the time from when the original sound
begins until when the chorus sound is heard. This adjusts
the difference in Pre Delay between each of the six phases
of chorus sound.
Depth Dev (Depth Deviation) -20–+20 [5 (40 03 07)]
Adjusts the difference in modulation depth between each of
the six phases of chorus sound.
Pan Dev (Pan Deviation) 0–20 [6 (40 03 08)]
Adjusts the difference in stereo position between each of
the six phases of chorus sound. With a setting of 0, all the
chorus sound will be located in the center. With a setting of
20, each chorus sound will be placed in 30 degree intervals
relative to the center position.
#Balance (Effect Balance)100:0–0:100(D:E) [16 (40 03 12)]
Adjusts the volume balance between the direct and the
processed sound.
“D” and “E” stand for “direct sound” and “effect sound”
respectively.
Low Gain -12–+12 [17 (40 03 13)]
Adjusts the low frequency gain.
Hi Gain (High Gain) -12–+12 [18 (40 03 14)]
Adjusts the high frequency gain.
Level (Output Level) 0–127 [20 (40 03 16)]
Adjusts the output level.
17: Tremolo Chorus [01H, 41H]
Tremolo Chorus is a chorus effect with added Tremolo
(cyclic modulation of volume).
fig.9-18
Pre Dly (Pre Delay Time) 0–100ms [1 (40 03 03)]
Adjusts the time delay from when the direct sound begins
until the chorus sound is heard.
Cho Rate (Chorus Rate) 0.05–10.0 [2 (40 03 04)]
Adjusts the modulation speed of the chorus effect.
Cho Depth (Chorus Depth) 0–127 [3 (40 03 05)]
Adjusts the modulation depth of the chorus effect.
Trem Phase (Tremolo Phase) 0–180 [4 (40 03 06)]
Adjusts the width of the tremolo sound.
+Trem Rate (Tremolo Rate) 0.05–10.0 [5 (40 03 07)]
Adjusts the modulation speed of the tremolo effect.
Trem Sep (Tremolo Separation) 0–127 [6 (40 03 08)]
Adjusts the spatial spread of the tremolo effect.
#Balance (Effect Balance)100:0–0:100(D:E) [16 (40 03 12)]
Adjusts the volume balance between the direct and the
processed sound.
“D” and “E” stand for “direct sound” and “effect sound”
respectively.
Low Gain -12–+12 [17 (40 03 13)]
Adjusts the low frequency gain.
Hi Gain (High Gain) -12–+12 [18 (40 03 14)]
Adjusts the high frequency gain.
Level (Output Level) 0–127 [20 (40 03 16)]
Adjusts the output level.
L
R
Hexa
Chorus
Balance
EQ
EQ
L
R
Tremolo
Chorus
Balance
EQ
EQ