Roland RSS AR-200R, Owner'S Manual

Page: 30 / 72

30
Controlling the AR-200R from an External Device (Control Input Connectors)
Assigning Phrases to the Terminals
Assign phrases 1 through 9 to Port Nos. 1 through 9.
Settings in Effect When a Card Is Formatted
fig.inp-13
Playing Back Phrases
Assigned to the Connectors
(Direct Playback)
What Is Direct Playback (Reverse Priority)?/Use and
Applications
By inputting control signals directly to Port Nos. 1 through 9,
you can play back the phrases assigned to those numbers. Up
to 9 phrases can be played back. Assign phrases 1 through 9
beforehand to Port Nos. 1 through 9.
This is very convenient when you want to specify a desired
phrase directly using a switch, relay, sensor, or other such
means.
fig.inp-08
Connecting External Devices
Connectors Used for Direct Play (Last-In)
(Control I/O Connector)
1 through 9: Inputting a control signal directly to the
connector with the number corresponding to the phrase
starts playback of the phrase.
“10 (STOP)”: Stop phrase playback.
In addition to the connectors just described, shorting the
“11/12 (GND)” (ground) connectors enables “On.”
fig.inp-09
* Control Input and DC Input Terminal (CONTROL A) “1, 2”
are connected in parallel with Control I/O Connector (Control
B) “1, 2.”
“Important Notes on Making Connections and Switching
the Power On and Off” (p. 9)
Operational Specifications for
Direct Playback (Last-In)
Basic Operation of Direct Playback (Reverse
Priority)
fig.inp-10
Playback:
Input control signals to Port Nos. 1 through 9.
→
This plays the phrase assigned to the connector.
stopping:
Input control signals to Port No. 10 (STOP).
→
This stops playback of the phrase.
“Operational Specifications for Control Input Playback”
(p. 28)
Priority Order
The most recently input control signal is given priority in
playback.
If a new and different control signal is input during playback
of a phrase, playback of the current phrase is stopped, and
playback of the specified phrase then begins.
fig.inp-11
Playback is repeated while the control signal is continuously
input.
fig.inp-12
1
0001
2
0002
3
0003 0004
4
0005
5 9
0009
Port No.
Phrase
Port No.
Phrase
1
0001
2
0002
3
0003 0004
4
0005
5
9
0009
A Control
Signal
A Control
Signal
A Control
Signal
A Control
Signal
A Control
Signal
A Control
Signal
10 1 1 2
Select a Phrase
COM
9
STOP
12 11
COM
0002
AUDIO OUTPUT
Port No. 1
Port No. 2
STOP Port
0001
0001 Interrupted
0001 0002
0001 Interrupt
AUDIO OUTPUT
Port No. 1
Port NO.2
AUDIO OUTPUT
Port No.1
0001 0001 0001
AR-200R_e.book 30 ページ ２０１０年７月１日 木曜日 午前１１時２４分