background image

5

Before you begin

Check the included items

The following items are included with the RPC-1. Immediately after opening the 
package, please check that all items are included. If any items are missing, please 
contact the retailer from whom you purchased the RPC-1.

RPC-1 

Drivers/Update CD-ROM

This contains driver software for using the RPC-1, and a system program updater 
that makes R-BUS devices compatible with the RPC-1.

RPC-1 Owner’s Manual

 This document.

R-BUS cable

 This cable is used to connect the RPC-1 to an R-BUS device.

Clock cable

 This cable is used to synchronize multiple RPC-1 units. For details refer to “Clock In 
and Clock Out Connectors.”

Main features

Digital multi audio

Eight input and eight output channels of digital audio can be transmitted and 
received simultaneously (maximum 24 bit, 96 kHz).

MIDI

The RPC-1 provides 16 channels of MIDI IN/OUT on the R-BUS. This allows MTC 
synchronization with a connected R-BUS device. 

Included drivers

• Windows 95/98/Me/NT4.0/2000 and Mac OS 8.6/9.0/9.1 are supported
• Windows MME, ASIO2.0, and Apple Sound Manager compatible drivers
• MIDI driver (OMS driver for the Macintosh)

In order to use the RPC-1’s 

MIDI

 functionality on the 

Macintosh

, you must 

install Opcode 
Corporation’s 

OMS 2.3.8. 

Install it using the 

“Drivers/Update” 

CD-ROM

 included with the 

RPC-1. For details, refer to 

p. 9 “Installing the RPC-1 

driver (Macintosh).”

Summary of Contents for RPC-1

























Reviews: