Part 1
1
1226 mm (48-5/16")
802 mm (31-5/8")
330 mm (13")
263 mm
(10-3/8")
100mm
(3-15/16")
209 mm
(8-1/4")
100 mm
(3-15/16")
124 mm
(4-15/16")
100 mm
(3-15/16")
895 mm (35-1/4")
393 mm (15-1/2")
150mm
(5-15/16")
349 mm (13-3/4")
50 mm
(2")
50 mm
(2")
122 mm
(4-13/16")
523 mm (20-5/8")
226 mm (8-15/16")
* Range of movement
for the XY table
Controller
Main unit
Switch panel
StartUp
Part
1
Part
1
1. Conditions for Installation
WARNING
Install the machine on a stable stand for operation.
Use within a temperature range of 5 to 40
°
C (41 to 104
°
F) and within a humidity range of 35 to 80%.
Avoid installing the PNC-3100 in the following locations, as this may result in damage to the machine.
• Avoid places subject to strong electrical noise.
• Avoid excessively dusty or damp places.
• The PNC-3100 generates heat during operation, so avoid poorly ventilated places.
• Avoid places where strong vibration is likely to affect the machine.
• Avoid places exposed to strong direct sunlight.
NOTICE
Do not install the machine in a location where it may tip over, such as at the edge of a
table.
Do not place anything
within the moving
area of the XY table.
CAUTION
The space shown in the
figure is required for in-
stallation.
Summary of Contents for PNC-3100 CAMM-3
Page 54: ...Appendix 44 MEMO ...
