46
Applying an effect
Using effect control to perform
When you play back an effect pattern for which Effect Control is specified,
the effect will change consecutively.
1
Select an effect pattern for which effect control has been
specified (p. 42).
2
As necessary, adjust the tempo at which the effect setting will
change (p. 57).
3
Press the [
](PLAY) button to begin playing the effect
pattern. If you are applying the effect to the external input,
start playing the external input as well.
If a loop has been recorded in the looper, the loop will begin playing at the
same time.
4
To stop playback, press the [
](STOP) button.
Making effect control settings
1
Select an effect pattern (p. 42).
2
As necessary, change the effect settings or effect type.
* Do not select an effect type that does not use effect control (
,
,
,
,
, or
). Effect control settings cannot be made if you select one
of these effect types.
3
Press the [SEQ REC] button.
This puts you in Step Edit mode, where you can make effect control settings.
4
Press the [SETUP] button.
Now you are ready to make effect control settings.
Summary of Contents for PhraseLab MC-09
Page 80: ...80 Memo...
Page 81: ...81 Memo...
