Preparing the Machine for Use
36
Step 7 : Performing Spindle Run-in
Perform spindle run-in to stabilize the rotation of the spindle.
Procedure
A
Click
in the VPanel top window, the [Maintenance] tab, and then click [Spindle...].
The VPanel "Spindle maintenance" dialog box appears.
B
Click [Start] next to "Run-in."
C
When the window shown in the following figure appears, click [OK].
Run-in will begin. (It takes approximately 40 minutes.)
D
When the window shown in the following figure appears, click [OK].