Using the Gift Kit
Using the Vise
Adjusting the Position
Procedure
A
Press the laser pointer button.
The laser pointer is irradiated. If the machine is idle for 5 minutes, the laser pointer is automatically
turned off.
B
Adjust the vise unit position.
Move the unit so that laser pointer points to the center of the area to be imprinted on the material.
1
Raise the lock lever.
2
Move the table so that the laser pointer points to the center of the area to be imprinted.
3
Lower the lock lever.
4
Adjust the vise unit position using the adjustment dial.
MEMO
The position to which the laser pointer points coincides with the center of the work area in METAZAStudio. By
making the position to which the laser pointer points coincide with the center of the area to be imprinted, you
can print with the exactly same layout as the one displayed on the METAZAStudio's work area.
12
