Roland Metaza MPX-90 User Manual Download

Page: 25 / 120

2-2 Cable Connections

Connecting the machine to a power supply

WARNING

Do not use with any electrical power supply that does not meet the ratings

displayed on the AC adapter.

Use with any other power supply may lead to fire or electrocution.

WARNING

AC Never use any AC adapter and power cord other than the AC adapter

and power cord included with the machine.

Doing so may lead to fire, electrical shock, or electrocution.

WARNING

Handle the power cord, plug, and electrical outlet correctly and with care.

Never use any article that is damaged.

Using a damaged article may result in fire or electrical shock.

WARNING

When using an extension cord or power strip, use one that adequately

satisfies the machine’s ratings (for voltage, frequency, and current).

Use of multiple electrical loads on a single electrical outlet or of a lengthy

extension cord may cause fire.

At this time, the connection to the computer must not be made yet.
Failure to follow the correct procedure may make installation impossible. You make the connection to the
computer when you install METAZA driver.



P. 25, “Installing METAZA Driver”

Machine

DO NOT connect a USB cable at this point.

Electrical

outlet

Power

cord

AC adapter

Computer

USB cable

Chapter 2 Installation and Setup

Summary of Contents for Metaza MPX-90

























































































































Search results

Summary of Contents for Metaza MPX-90

Reviews:

Related manuals for Metaza MPX-90

Brands by name

Popular brands

Roland Metaza MPX-90, User Manual

Search results

Summary of Contents for Metaza MPX-90

Reviews:

Related manuals for Metaza MPX-90

Brands by name

Popular brands