Roland Metaza MPX-90 User Manual Download

Page: 23 / 120

Removing and storing the retainers

Retaining materials are attached to protect the machine from vibration during shipment. Remove these after
emplacement.



Remove all Retaining materials. Any that remain may cause faulty operation or breakdown when the power

is switched on.



The retaining materials and package are required when moving the machine to a different location. Store

them carefully so that they do not get misplaced.

Removing the retainers

The machine is secured at three points (with 5 screws). Remove all the screws and retainers with the provided
hexagonal wrench.

Continue on the next page

Hexagonal wrench

Screw

Retainer

Screws

Chapter 2 Installation and Setup

2-1 Installation

Summary of Contents for Metaza MPX-90

























































































































Search results

Summary of Contents for Metaza MPX-90

Reviews:

Related manuals for Metaza MPX-90

Brands by name

Popular brands

Roland Metaza MPX-90, User Manual

Search results

Summary of Contents for Metaza MPX-90

Reviews:

Related manuals for Metaza MPX-90

Brands by name

Popular brands