Roland JEWELA JWX-10, User Manual

Page: 48 / 64

4-3 Setting the Y-axis Origin for the Rotary Axis Unit
Chapter 4 Feature Reference 46
3.
Perform detection of the Y-axis origin point for the rotary axis unit.
➊
Close the front cover.
Press the VIEW button to make the VIEW light go out.
➋
Using the operation panel screen, select
[Set the Y origin at the center of rota-
tion].
Select [Start Detection].
The cutter automatically makes contact with
the sensor.
➌
Click [Continue].
The cutter automatically makes contact with the sen-
sor.
➍
When the screen appears, open the front cover.
Rotate the spindle half a turn.
➎
Close the front cover.
Click [Continue].
The cutter automatically makes contact with the sen-
sor, and the Y origin point for the rotary axis unit is set,
again.
Spindle
Spindle