Roland HP-207, Owner'S Manual

Page: 78 / 120

76
Various Settings
In “Function mode” you can make various settings for performance and recording.
fig.Panel-Function-e.eps
1.
Hold down the [Effects] button and press the
[3D] button.
A screen like the following will appear, and you’ll be in
Function mode.
fig.FuncMenu-d.eps
The [Effects] button, [3D] button, and [ ] button
will blink, and the [
▲
] button, [
▼
] button, and [Piano
Designer] button will light.
2.
Use the [
▲
] [
▼
] buttons to select the setting
that you want to change.
3.
Press the [ ] button to enter the setting
screen.
4.
Use the [-] [+] buttons to change the setting.
5.
Press the [Piano Designer] button to return to
the previous screen.
If you want to make other settings, return to step 2 and
select the setting you want to change.
6.
Press the [Piano Designer] button to exit
Function mode.
The indicators on buttons will return to their original
state.
The settings you change will return to their original
state when you turn off the power. If you want your
changes to be retained even after the power has
been turned off, carry out the Memory Backup
procedure (p. 86) to save the settings.
Settings you can change
Basic Operation in Function Mode
Function Page
Master Tuning p. 77
Equalizer p. 78
Part Mute p. 79
Accomp Track p. 79
Play Mode p. 79
Metronome Sound p. 80
Metronome Pattern p. 80
Countdown p. 80
Countdown Sound p. 80
Countdown Part p. 80
Transpose Mode p. 81
Octave Shift p. 81
Fix Velocity p. 81
Damper Pedal Part p. 81
Center Pedal Part p. 81
Left Pedal Part p. 81
Center Pedal Func p. 81
Left Pedal Func p. 81
NOTE
HP207_e.book 76 ページ ２００６年１２月２５日 月曜日 午前９時５２分