Roland HP-207, Owner'S Manual

Page: 88 / 120

86
Various Settings
Normally, the settings of the various variations will revert to
their default values when the power is turned off. However,
you can specify that the various settings will be remembered
even when the power is turned off.
This function is called “Memory Backup.”
1.
Hold down the [Effects] button and press the
[3D] button.
The HP207 will enter Function mode.
2.
Use the [
▲
] [
▼
] buttons to select “Memory
Backup.”
fig.d-FuncMenu-Backup.eps
3.
Press the [ ] button.
The following appears in the display.
fig.d-Backup.eps
If you decide to cancel without executing, press the
[Piano Designer] button.
4.
If you’re sure you want to execute Memory
Backup, press [
].
A confirmation message appears in the screen.
fig.d-Backup2.eps
5.
Press the [ ] button.
If you decide to cancel without executing, press the
[
] button.
When the memory backup operation is completed, the
function mode menu screen will appear.
For details on the items that are memorized, refer to
“Parameters Stored in Memory Backup” (p. 105).
The settings you’ve changed in Function mode can be restored
to their factory-set condition. This operation is called “Factory
Reset.”
Execute this operation if you want the settings you’ve stored
using Memory Backup to be returned to their original state.
When you execute “Factory Reset,” all settings
you’ve stored up to that point will be cleared, and
reset to their factory-set condition.
Executing this operation will not erase the songs
from internal memory or USB memory.
If you want to erase all songs from the HP207‘s
internal memory and all songs from USB memory,
refer to “Initializing the Memory” (p. 67).
1.
Hold down the [Effects] button and press the
[3D] button.
The HP207 will enter Function mode.
2.
Use the [
▲
] [
▼
] buttons to select “Factory
Reset.”
fig.d-FuncMenu-Reset.eps
3.
Press the [ ] button.
The following appears in the display.
fig.d-Reset.eps
If you decide to cancel without executing, press the
[Piano Designer] button.
Remembering the Settings
(Memory Backup)
NOTE
Restoring the Settings to the Factory
Condition (Factory Reset)
NOTE
HP207_e.book 86 ページ ２００６年１２月２５日 月曜日 午前９時５２分