Roland HP-207, Owner'S Manual

Page: 83 / 120

81
Various Settings
This setting specifies what the key transpose will affect.
You can use the key transpose to change the pitch of both the
song and the keyboard, the pitch of only the song, or the pitch
of only the keyboard.
→
Key Transpose (p. 36), Playback Transpose (p. 55)
You can change the pitch of the Lower Tone in Dual Play (p.
40) and Split Play (p. 43) an octave at a time.
Altering the pitch in one-octave units in this way is called
“Octave Shift.”
For example, you can raise the pitch of the Lower Tone to the
same pitch of the Upper Tone in Split Play.
The range of available pitch change spans from two octaves
higher to two octaves lower.
The pitch is lowered one octave each time the [-] button is
pressed, while each press of the [+] button raises the pitch by
one octave.
To return to the original pitch, press the [-] and [+] buttons
simultaneously.
This sets the velocity the sound will have when the keyboard
touch (p. 30) is set to “Fixed.”
If you turn the keyboard’s touch sensitivity “Fixed,” all notes
will sound at a fixed loudness regardless of how strongly you
play the keyboard. The setting described below specifies the
loudness in this case.
When you press the pedal during Dual performance or Split
performance, the pedal effect is normally applied to both
tones, but you can also select the tone to which the effect is to
be applied. This setting can be changed for each pedal.
When you turn on the power, the left pedal functions as the soft
pedal, and the center pedal functions as the sostenuto pedal (p.
20). You can change the function of the pedal to a variety of
other operations.
Keyboard Settings
Specifying What the Key Transpose
will Affect (Transpose Mode)
Setting Explanation
Keyboard
Keyboard notes
Song
Song playback
Keyboard & Song
Keyboard notes and song playback
Changing the Pitch of the Tone in
Octave Steps (Octave Shift)
Indication
-2–0–2
Changing the Velocity When the Key
Touch is Set to “Fixed” (Fix Velocity)
Indication
1–127
Pedal Settings
Changing How the Pedal Effects Are
Applied (Damper/Center/Left Pedal Part)
Setting Explanation
Right & Left
All enabled
Right
Applied only to the Tone 1 (in dual mode)/
Right-hand Tone (in split mode)
Left
Applied only to the Tone 2 (in dual mode)/
Right-hand Tone (in split mode)
Changing How the Pedals Work
(Center/Left Pedal Func)
Function Description
Damper Sets function to damper pedal.
Soft Sets function to soft pedal.
Sostenuto Sets function to sostenuto pedal.
Expression Allows control of the volume.
Effects Switch
Effects can be switched on/off by pressing
the pedal instead of pressing the [Effects]
button. When effect type is rotary, you can
control the slow/fast of spinning.
Bend Up
Pitch rises by pressing the pedal.
Bend Down
Pitch lowers by pressing the pedal.
Modulation
Vibrato is added by pressing the pedal.
Play/Stop
The pedal will have the same function as
the [
] button.
Layer
Pressing the pedal will layer on Tone 2,
used for Dual performance.
* The Layer function can be applied only
when using Dual play (p. 40).
Octave
Pressing the pedal will layer on a sound
one octave higher.
* The Octave function cannot be applied
while using Twin Piano (p. 38), Dual play
(p. 40), or Split play (p. 43).
HP207_e.book 81 ページ ２００６年１２月２５日 月曜日 午前９時５２分