Roland FP-7, Owner'S Manual

Page: 31 / 188

31
Listening to Songs
Here’s how to adjust the volume that a part will have after you’ve pressed a track button
to mute the playback while playing back a song.
The FP-7 lets you play back a specific part at a reduced volume so you can use that part
as a “guide” for your own playing.
1.
Select the song that you want to play (p. 26, p. 32, p. 33).
2. Hold down a track button and use the [-] [+] buttons to specify the volume
that the track will have when its playback is muted.
The volume for when the playback is muted will be shown while you hold down the track button.
fig.d-MuteVol-0.eps
The track mute volume can be set to any value from 0 to 80.
When you turn off the power, the track mute volume setting will return to “0.”
You can also adjust the track mute volume by turning the [Balance] knob while you
hold down the track button.
Determining the Volume of a Muted Track
When the following appears in the display
If there is a song you’ve recorded but not saved, a screen like the following will appear
when you select a song.
fig.d-SongDelete.eps
You can’t play back a preset song if there is a song you haven’t saved.
If you want to erase your performance and play back the preset song, hold down the
[Display] button and press the [+] button to select “OK,” then press the [Rec] button.
If you don’t want to erase your performance, hold down the [Display] button and press
the [-] button to select “Cancel,” then press the [Rec] button.
For details on saving a performance you’ve recorded, refer to “Saving the Songs You
Record” (p. 105).
NOTE
FP-7-e.book 31 ページ ２００６年１２月１４日 木曜日 午前１０時５７分