Roland FP-4 Owner'S Manual Download Page 42

Page: 42 / 140

Performing

You can add liveliness to the sound to give it superb clarity and distinctness.

fig.Panel-SoundControl.eps

Press the [Sound Control] button so it’s lit.

The Sound Control function is switched on, enlivening the sound.

While holding down the [Sound Control] button, press the [-] or [+] button
to change the type.

fig.d-1.eps

Turning Off Sound Control

Press the [Sound Control] button so its light is turned off.

You can have the FP-4 remember whether the [Sound Control] button should be on or
off when you turn on the power (p. 84).

For some sounds, this may cause distortion. If the sound distorts, refer to “Adjusting the
Volume (Master Gain)” (p. 85).

The Sound Control function is not applied to the sounds of external devices connected
to the Input jacks.

Adding Liveliness to the Sound (Sound Control)

Setting

Type

Description

Sharp

Creates a sound with boosted bass and treble.

Clear

Produces a sound with chords in the low registers that are clear and distinct.

Power

Creates a sound with boosted bass.

NOTE

FP-4-e.book 42 ページ２００７年５月２４日　木曜日　午後７時１０分

Summary of Contents for FP-4













































































































































Search results

Summary of Contents for FP-4

Reviews:

Related manuals for FP-4

Brands by name

Popular brands

Roland FP-4, Owner'S Manual

Search results

Summary of Contents for FP-4

Reviews:

Related manuals for FP-4

Brands by name

Popular brands