Roland FLATJET FLJ-300 Setup Manual Download

Page: 34 / 40

6. Removing the Packing Materials 2

Remove the Packing Materials From the Base Section

Tape and packing materials are attached to the machine to protect it from vibration during transportation. When
installation is complete, remove them.

CAUTION

Be sure to remove the tape and packing materials according to the procedure.

Failure to follow the procedures may cause sudden operation or the like of the machine,
which may result in unexpected injury.

➢

Remove all packing materials. Any that remain may cause faulty operation or breakdown when the power is
switched on.

➢

Store the packing materials carefully, because they are needed again when transporting the machine for relo-
cation or the like.

➊

Switch on the main power.

➋

Press the SERVO ON to switch on the sub
power.

➌

Use

to raise the lifter to the top.

F 1

F 2

F 3

F 4

F 5

F 6

SERVO ON

Main power

Summary of Contents for FLATJET FLJ-300









































Search results

Summary of Contents for FLATJET FLJ-300

Reviews:

Related manuals for FLATJET FLJ-300

Brands by name

Popular brands

Roland FLATJET FLJ-300, Setup Manual

Search results

Summary of Contents for FLATJET FLJ-300

Reviews:

Related manuals for FLATJET FLJ-300

Brands by name

Popular brands