40
Patch Mode
You can delete content in streams.
1
In the Patch Mode’s top screen, press PARAMETER [
].
2
Press PARAMETER [
] [
] to select the stream from which you want to
delete data, then press [WRITE].
3
Press PARAMETER [
] [
] to select “Delete MIDI,” then press [WRITE].
4
“Sure?” appears in the display; press [WRITE] once more.
5
After making the changes, follow the instructions in “Storing (Saving)
Patches” (p. 44) to save the MIDI messages to a patch.
1
In the Patch Mode’s top screen, press PARAMETER [
].
2
Press PARAMETER [
] [
] to select “Off Timing.”
3
Press VALUE [
] [
] to set the value.
4
After making the changes, follow the instructions in “Storing (Saving)
Patches” (p. 44) to save the MIDI messages to a patch.
How to Delete MIDI Streams
Setting the Timing for Transmission of OFF MIDI Streams
Value
Explanation
PEDAL RELEASE
After the patches are switched, the OFF stream is transmit-
ted when the pedal is released.
PATCH CHANGE
The stream is transmitted when the next patch is selected.
The OFF stream is transmitted immediately before the ON
stream for the next patch is transmitted.
Setting the timing
for transmission
The Off Timing parameter is
set to PATCH CHANGE when
shipped from the factory.
FC-300_e1.book 40 ページ ２００７年４月２４日 火曜日 午前１０時１０分
