Audio Follows Video
March 2010
Page 3 of 4
3) Adjust the MIN/MAX level for your assigned faders. This will adjust how low a fader should go when a
video source is inactive and how high a fader should go when a video source is selected and active.
4) Cursor to the V-LINK button in the upper left of screen and activate it (ENTER).
Your V-Mixer is now ready to accept SOURCE MIDI commands from your EDIROL video mixer and actuate
corresponding faders.
Now, you need to make a few settings in your EDIROL video mixer so it will send V-LINK MIDI data to your
RSS V-Mixer.
