Owner’s Manual
Main Features
The S-4000-SP is a REAC splitter for use with the RSS S-4000 Digital Snake System.
Use of this REAC splitter enables you to do the following:
• It permits you to extend REAC cables in lengths of 100 meters.
• It allows you to split the master REAC device’s input audio to a split REAC device.
In addition, the S-4000-SP also has the following features:
• The S-4000-SP is made up of two independent 5 port splitters with independent
power supplies. These two splitters can be used independently as dedicated
splitters for the REAC device’s MAIN port and BACKUP port. This provides a fully
redundant REAC connection system.
• Two independent internal power supplies furnish power to each of the two internal
splitters, enabling uninterrupted use in the event the power happens to cut out in
one of the power supplies or if there is some other sort of power interruption.
201b
Before using this unit, carefully read the sections entitled: “IMPORTANT SAFETY
INSTRUCTIONS” (p. 2), “USING THE UNIT SAFELY” (p. 3–4), and “IMPORTANT
NOTES” (p. 5). These sections provide important information concerning the
proper operation of the unit. Additionally, in order to ensure that you have
gained a good grasp of every feature provided by your new unit, the Owner’s
manual should be read in its entirety. The manual should be saved and kept on
hand as a convenient reference.
202
Copyright © 2006 ROLAND CORPORATION
All rights reserved. No part of this publication may be reproduced in any form
without the written permission of ROLAND CORPORATION.
04451078 06-08-1N
*
0
4451078
-
0
1
*
S-4000-SP_e.book 1 ページ ２００６年８月２４日 木曜日 午前１０時３３分
