13
Tone Parameters (Upper/Lower Tone Menu)
LFO
(LFO Select)
Pulse Width Modulation (PWM) means changing the pulse width
periodically.
LFO Select decides which of the LFO’s is to be used for modulating
the pulse width.
Value:
+1, -1, +2, -2, +3, -3
Positive Phase (+)
Negative Phase (-)
Indication
LFO
(Phase)
+1
LFO-1 (+)
-1
LFO-1 (-)
+2
LFO-2 (+)
-2
LFO-2 (-)
+3
LFO-3 (+)
-3
LFO-3 (-)
LFOD
(LFO Depth)
This sets the depth of the PWM. Higher values Deepen the effect.
Value:
0–100
TVF
(Time Variant Filter)
TVF
Freq
(Cutoff Frequency)
Sets the cutoff point of the TVF. As you lower the value, higher
frequencies are removed and the waveform gradually become an
approximation of a sine wave, then the sound will finally fade out.
Value:
0–100
Frequency
Lev
el
Cutoff Point
Frequency
Lev
el
Cutoff Point
Frequency
Lev
el
Cutoff Point
Frequency
Lev
el
0
100
Value
Reso
(Resonance)
Boosts the cutoff point. As you increase the value, specific
harmonics are emphasized and the sound will become more
unusual, more electronic in nature.
Value:
0–30
Cutoff Point
Frequency
Lev
el
0
30
Value
Cutoff Point
Frequency
Lev
el
Cutoff Point
Frequency
Lev
el
Cutoff Point
Frequency
Lev
el
KF
(Keyfollow (Cutoff Point))
Keyfollow can change the cutoff point depending on the key
played. Just like the Keyfollow of WG pitch, the value represents
how many octaves change over 12 keys.
Value:
-1, -1/2, -1/4, 0, 1/8, 1/4, 3/8, 1/2, 5/8, 3/4, 7/8, 1, 5/4, 3/2, 2
0
-1
-1/4
-1/2
1/8
1/4
3/8
1/2
5/8
3/4
7/8
1
5/4
3/2
2
1
0
-1
2
+3
Pitch
(Octave)
Middle C (C4)
BP
(Bias Point)
You can add a further change (= bias level) to the Keyfollow curve,
and set the range (bias direction) where the bias level is valid. The
bias range is where the bias level is valid on the keyboard. It can
be set with the bias point (where the bias range begins) and bias
direction ( < or > ).
Value:
<A1–<C7, >A1–>C7
Display Example Example Function
>C4
The bias level is only valid on the keyboard above the C4
key.
<C4
The bias level is only valid on the keyboard below the C4
key.
