10
Tone Parameters (Upper/Lower Tone Menu)
EQ/CHORUS
(Equalizer/Chorus)
EQ Edit
(Equalizer)
In the equalizer section, the frequency characteristic of the sound
can be modified.
U:EQ Edit
Lf 300 Lg +01
Frequency
LowFreq
LowGain
Level 0
Lf
(Low Frequency)
Sets the frequency where the gain is altered in the low to middle
range.
Value:
63, 75, 88, 105, 125, 150, 175, 210, 250, 300, 350, 420, 500,
600, 700, 840 Hz
Lg
(Low Gain)
Sets the gain of the lower frequencies.
“+”
settings raise the gain, and
“-”
settings lower it.
Value:
-12–+12 dB
Hf
(High Frequency)
Sets the frequency where the gain is altered in the middle to high
range.
Value:
250, 300, 350, 420, 500, 600, 700, 840 Hz, 1.0, 1.2, 1.4, 1.7,
2.0, 2.4, 2.8, 3.4, 4.0, 4.8, 5.7, 6.7, 8.0, 9.5 kHz
HQ
(High Q)
Sets the width of the frequency band where the gain is boosted
or cut. With a higher value, the frequency band is narrower, and
vice versa.
Value:
0.3, 0.5, 0.7, 1.0, 1.4, 2.0, 3.0, 4.2, 6.0
Frequency
HiFreq
Level 0
HQ is Height.
HQ is low.
Hg
(High Gain)
Sets the gain of the Hf frequency.
“+”
settings raise the gain and
“-”
settings lower it.
Value:
-12–+12 dB
Frequency
HiFreq
Level 0
HiGain
Chorus Edit
(Chorus)
U:Chorus Edit
Type 02 Rate 25
Type
(Chorus Type)
Selects one of the 8 basic chorus effects.
Value:
01–08
Indication
Type
01
Chorus 1
02
Chorus 2
03
Flanger 1
04
Flanger 2
05
Feedback Chorus
06
Tremolo
07
Chorus Tremolo
08
Dimension
Rate
(Chorus Rate)
Sets the rate of the chorus effect. Higher values quicken the rate.
Value:
0–100
Dpth
(Chorus Depth)
Sets the depth of the chorus effect. Higher values deepen the
effect.
Value:
0–100
Bal
(Chorus Balance)
This sets the volume balance of the chorus of the chorus sound
and normal sound.
Value:
0–100
