11. Print the file as you normally would.
Printing and Cutting Limitations in Illustrator 9.0
If Transparency or any effects such as Blur or Drop Shadows are applied to any object in the artboard, the
cutting line may be printed. When performing printing and cutting, you should not use Transparency or effects
such as Blur at all.
Workarounds for this problem and information about special effects that are subject to limitations are
described in detail in the supplemental "Printing and Cutting Limitations and Workarounds in Illustrator 9.0"
and "The Transparency Feature of Illustrator 9.0".
Macromedia FreeHand 8 [Macintosh]
1. Copy the file ‘SOLJET.bcf’ or ‘CAMMJET.bcf’ or, located in the ‘SpotColorLibrary : SOLJET or CAMM
JET : FreeHand’ folder of the Installation CD to FreeHand 8 : Colors folder.
2. Start
FreeHand.
3. Create a new design file or open an existing file.
4. Execute
Window
>
Panels
>
Color List
and open the Color List Palette.
5. Select
‘
SOLJET
’ or ‘
CAMM JET
’ from the ‘
Options
’ menu of Color List Palette.
The “
CutContour
” color will be listed in the Color Library window. .
6. Select the “
CutContour
” and click
OK
to add in the Color List Palette.
7. To make a cutting line, select “
CutContour
” as the color for the paths that you would like to cut.
Quark QuarkXPress 4.1 [Macintosh]
1. Select
Edit
>
Color
and click
Add
from the Default Color dialog.
2. Execute
File
>
Import
and select the file ‘SOLJET QuarkXPress’ or ‘CAMM JET QuarkXPress’, located in
the ‘SpotColorLibrary : SOLJET or CAMM JET : QuarkXPress’ folder. (It is best to copy this file to your
Hard Disk before importing it.)
3. Click
"
Select All
" to move all the items to
Use Items
and click
OK
.
4. Click
Save
to save the color palette.
5. Use the added color palette to create the new design.
Adobe PageMaker 6.5 [Macintosh]
1. Copy the file ‘SOLJET.bcf’ or ‘CAMMJET.bcf’, located in the ‘SpotColorLibrary : SOLJET or CAMM
JET : PageMaker6.5’ folder to the ‘Pm6.5 : RSRC : Usenglsh : Color’ folder.
2. Create a new design or open an existing file.
3. Click
Window
>
Color
and display the Color Palette. Click on the
New
icon from the Color Palette.
4. Select
'
SOLJET
' or '
CAMM JET
' from the
Color Edit Library
pull down menu.
“
CutContour
” will be displayed in the Color Library window.
5. Click
OK
. Color Edit dialog is displayed.
6. Click
OK
to close the dialog.
7. “
CutContour
” will be added in the Color Palette. Use this palette to define the Cut line.
48
