Windows 2000 Installation
This section describes how to install the software on computers running Windows 2000. You must logon with
Administrator privileges to install the software.
1. Insert the Roland ColorChoice Installation CD into your CD ROM drive. The CD Setup window displays.
2. From the CD Setup window, select the language of the installer you would like.
3. Click
Next
. The Software to Install window displays.
4. Select the language you would like from the
Language
drop-down box.
5. Click
Next
. The Welcome window displays.
6. Click
Next
. The Select Components window displays.
7. Select
Typical
if you want to install the complete software,
Custom
if you want to choose the
components to install.
8. Click
Next
. The Select Program Folder window displays.
9. Select the folder you would like Roland ColorChoice to display in.
10. Click
Next
. The Choose Destination Location window displays.
11. Select the destination by clicking on
Browse
or accept the default location.
12. Click
Next
. After the installation is completed, the Restarting Windows dialog displays.
Note
: If you currently have Roland ColorChoice on your system the Clear Preferences window displays.
Click
Yes
to delete preference settings on your system.
13. Select
Yes
and click
OK
to restart your computer.
Setting Up the Roland ColorChoice
After the computer restart, Roland ColorChoice is automatically launched and you are prompted to select the
output device.
1. Select a printer model.
2. Click
Next
.
3. Select the port type you would like to use. You may choose LPT or TCP/IP.
4. Click
Finish
.
5. Click
OK
.
When using Windows 2000, the PostScript Printer driver will be automatically installed.
Before Using Roland ColorChoice
Before using Roland ColorChoice, you have to configure the PS Driver properly.
1. Click
Start
>
Settings
>
Printers
and open the Printers folder.
2. Right click on the icon of your printer and select
Properties
from the pop- up menu.
3. Select the Advanced tab from the Printer Properties dialog.
4. Select
“
Print directly to the printer
” and click OK.
You can now print from Adobe PS Printer driver to the Roland ColorChoice. You will notice, each time that
your computer is started, an icon for the Roland ColorChoice Software is displayed in the lower right corner of
your monitor. This indicates that your computer is ready to begin printing to the Roland ColorChoice.
11
