may occur if these settings are kept different. (For more information about color stitching, refer to "The
Transparency Feature of Illustrator 9.0" later in this document.)
3. Click
OK
in the Setup Properties dialog.
4. In Illustrator, go to
File>Document Setup
. From the pop-up menu, choose
Transparency
.
5. The
Quality/Speed
slider should normally be left at the center position. If you have output problems
such as missing portions of the artwork, move the slider one tick to the left. (If you are performing
printing only, move it all the way to the left.)
6. Next, from the pop-up menu, choose
Print & Export
.
7. For
Options
, select
Use Printer's Default Screen
.
8. Set
Rasterization Resolution
to around 100 to 300 dpi. If you are going to perform enlarged printing
with Roland ColorChoice, set this to an even larger value. Larger values yield correspondingly higher
image quality, but processing time will be correspondingly longer. Set
Mesh
to a value that is the same
or about half of
Rasterization Resolution
.
9. Next, from the pop-up menu, choose
Artboard
.
10. Check
‘
Use Print Setup
’.
11. Click
the
Print Setup
button. Print Setup dialog displays.
12. Select your printer in the
Name
field.
13. Click
the
Properties
button.
14. Choose a standard paper size from the ‘
Paper
’ field or select a
Custom
page for a custom page size.
15. If you choose a custom page size, you may enter the custom size by clicking the
Custom
button and
entering the width and height. Click
OK
to Custom Defined Size dialog.
16. Click
OK
in the Properties dialog.
17. Click
OK
in the Print Setup dialog.
18. Click
OK
in the Document Setup dialog.
19. Go
to
File>Print
.
20. Check
Ignore Overprinting in Composite Output
for normal use.
21. If not dimmed, set
Output
to
Composite
.
22. Set
PostScript
to
Level 3
.
23. Check
Force Fonts to Download
.
24. Click
OK
to print.
Adobe PageMaker® 6.5 [Windows]
These directions assume that you have Kodak ICC Color Management installed.
Before starting PageMaker, copy your printer’s PPD file to PM65\RSRC\USENGLSH\PPD4 directory. The
PPD files can be found on C:\Program Files\Roland ColorChoice 4\PPD’ folder.
1. From the Roland ColorChoice Print Monitor, click
Setup
>
Setup Properties
. Then click the Print tab.
2. Make sure the
Perform Color Correction
checkbox has a check in it.
3. In the ICC input profile area, select appropriate CMYK and RGB profiles. If you know which profiles your
application is using, select that profile. If you don’t, use the default settings.
4. For the ICC output profile, select the appropriate ink/media combination. Also select a rendering intent to
use.
5. Click
OK
to Setup Properties.
6. In PageMaker go to
File
>
Document Setup
.
36
