Roland AT15 Music Atelier Owner'S Manual Download

Page: 42 / 120

Adding Various Effects to a Voice

Changing the Type of Harmony

Intelligence

There are 6 different Harmony Intelligence.

When you press the [Harmony Intelligence] button, the most appropriate
voice(s) will be automatically set.

The manner in which notes will sound also depends on the Harmony type.

Press the [Harmony Intelligence] button (indicator lights).

While the Harmony Intelligence name is shown in the

display screen, use the Value [-] [+] buttons to select the
Harmony Intelligence.

The indicator of the [Harmony Intelligence] button will blink.

To cancel the procedure, press the [Display/Exit] button.

Once again, press the [Harmony Intelligence] button.

The indicator of the [Harmony Intelligence] button will light, and the
Harmony Intelligence is confirmed.

Harmony Intelligence types:

Harmonies are added only to the Upper voice.

Type

Solo Voice

Upper Voice

Number of notes

of the harmony

BIG BAND

Trumpet

Flugel Horn

STRINGS

Strings 1

TRADITIONAL

Currently Selected Tone

HARP

—

Harp

JAZZ SCAT

Jazz Scat

OCTAVE 1

Currently Selected Tone

You can also play the
upper manual to confirm
the type of the Harmony
Intelligence.

The number of notes of the
harmony will depend on
the Harmony Intelligence
type.

Harp-type harmony
intelligence will not sound
the keys you play. Use your
left hand to play a chord in
the lower keyboard and use
your right hand to play a
glissando on the upper
keyboard, and a beautiful
harp glissando will be
produced.

AT-15_e.book 42 ページ２００５年１月２１日　金曜日　午後８時１４分

Summary of Contents for AT15 Music Atelier

























































































































Search results

Summary of Contents for AT15 Music Atelier

Reviews:

Related manuals for AT15 Music Atelier

Brands by name

Popular brands

Roland AT15 Music Atelier, Owner'S Manual

Search results

Summary of Contents for AT15 Music Atelier

Reviews:

Related manuals for AT15 Music Atelier

Brands by name

Popular brands