[FX1 only]
[EQ] EQUALIZER
1. EQ SW
(0 -1)
OFF, ON
Switches equalizer on/off. This is a mono effect.
2. EQ LOW CUT
(0 - 17) Flat – 800Hz
This sets the frequency at which the low cut filter
begins to take effect. When “FLAT” is selected, the
low cut filter will have no effect. No effect: 0.
3.
EQ LOW GAIN
(0 - 40) -20dB – 20dB
Adjusts the low frequency range tone ±20dB.
4. EQ LOW MID FREQ (0 - 27) 20Hz – 10.0KHz
Specifies the center of the frequency range that will
be adjusted by the LOW-MID GAIN.
5. EQ LOW MID Q
(0 - 5)
0.5 – 16
Adjusts the width of the area affected by the EQ
centered at the LOW-MID FREQ. Higher values will
narrow the area.
6. EQ LOW MID GAIN (0 - 40) -20dB – 20dB
Adjusts the low-middle frequency range tone
±20dB.
7. EQ HIGH MID FREQ (0 - 27) 20Hz – 10.0KHz
Specifies the center of the frequency range that will
be adjusted by the HIGH-MID GAIN.
8. EQ HIGH MID Q
(0 - 5)
0.5 – 16
Adjusts the width of the area affected by the EQ
centered at the HIGH-MID FREQ.
9. EQ HIGH MID GAIN (0 - 40) -20dB – 20dB
Adjusts the high-middle frequency range tone
±20dB.
10. EQ HIGH CUT
(0 - 14) 630Hz – Flat
This sets the frequency at which the high cut filter
begins to take effect. When “FLAT” is selected, the
high cut filter will have no effect. No effect: 14.
11. EQ HIGH GAIN
(0 - 40) -20dB – 20dB
Adjusts the high frequency range tone ±20dB.
12. EQ LEVEL
(0 - 40) -20dB – 20dB
Adjusts the volume level of the equalizer. However,
this feature does not appear to be implemented.
