Performing
27
MEMO
You can change the functions that are assigned to the [S1] [S2] buttons. For details, refer to
“Assigning Functions to the Knobs, Buttons, and Jacks” (p. 37).
To select sounds from a different bank, first transmit a Bank Select message, and then transmit a
Program Change message.
* Simply transmitting a Bank Select message will not make the sound change.
* The Bank Select message must be sent before the Program Change message.
What is a bank?
MIDI sound modules organize their numerous sounds in various groups according to the
category of sound. These groups are called “banks.”
”Program change messages can only select sounds within the same bank, but by using
these in conjunction with bank select messages, you can select different variations of
sound.
* The way in which sounds are organized will differ for each sound module. For details,
refer to the owner’s manual of the sound module you are using.
Transmitting the Bank Select MSB
Value
0–127
0–9
For details on this value, refer to p. 8.
Transmitting the Bank Select LSB
For details on this value, refer to p. 8.
Value
0–127
0–9
Summary of Contents for A-49
