Roksan Audio ltd
Xerxes.20 Record Player User Manual
General Use
Version 3.0
All specifications are liable to change without notice. E&OE
Page 15 of 22
ENGLISH
Drive Belt Set-up and Maintenance
2
The Motor/Pulley axis can also be aligned just as the Main
Bearing/Inner Platter axis. See above
3
If the levels are adjusted but the drive belt rides a little too high,
then remove the belt and gently stretch it. Wait a couple of
minutes and refit the drive belt and the outer platter and check the
running position again (Repeat this process if necessary)
View from B
BELT WOULD RIDE SLIGHTLY
HIGHER ON THE PULLEY
View from A
Motor Pulley & Inner/outer platter
alignment
A
A
2.5mm A/F ALLEN KEY
BELT WOULD RIDE SLIGHTLY
HIGHER ON THE PULLEY
BELT WOULD RIDE SLIGHTLY
LOWER ON THE PULLEY
