background image

 

 

Always ensure your compressor is level and stable.  Using your compressor on 
unlevel or unstable ground may cause a lack of lubrication and the pump to seize, 
this damage will not be covered under warranty. 

 

Never run this compressor with the wheels and rubber stopper being correctly 
fitted. 

 

Never use an extension cord with this compressor always use a longer air hose. 

 

Domestic air compressors are not designed for industrial / commercial 
applications. 

 

Domestic air compressors are not designed for continuous running. 

 

Avoid touching the pump area as it can become very hot and may burn. 

 

Ensure that the air compressor is disconnected from the mains supply when not in 
use, before servicing, lubricating, making changes and when changing 
attachments such as air hoses / tools. 

 

Always use the correct type of tool for the operation to be carried out. 

 

Never use the air compressor if any part of the unit is damaged.  Always have the 
air compressor serviced by an authorised service agent. 

 

Always wear safety eye, ear and respiratory protection when operating the air 
compressor. 

 

Allow the tank to completely fill before using the air compressor. 

 

If the air compressor makes an unfamiliar sound or vibrates excessively, switch 
the air compressor ‘OFF’ immediately and disconnect from the mains power 
supply. Investigate the possible cause or consult your authorised service facility. 

 

Always move the air compressor using the handle and wheels. 

 

Always use the air compressor on stable ground. 

 

This air compressor is designed to compress normal air.  Never use to compress 
any other type (s) of gases. 

 

Never direct the jet of air or other liquids / gases towards your body, other persons 
or animals. 

 

Never direct the jet of air or other liquids / gases towards this air compressor. 

 

This air compressor is not suitable for pharmaceutical, food or sanitary purposes. 

 

This air compressor is not to be used to for filling scuba or oxygen air bottles or 
tanks. 

 

Always follow the instructions relating to the tools attached to this air compressor. 

 

SPECIFICATIONS 

Model 

150-02-50222 

150-02-50243 

150-02-50474 

Tank Capacity 

24L 

40L 

40L 

Voltage 

230V/50HZ 

230V/50HZ 

230V/50HZ 

Motor 

1.5 HP 

2.0 HP 

2.5 HP 

Amp 

5.0A 

7.0A 

9.0A 

Speed 

2850 RPM 

2850 RPM 

2850 RPM 

Drive Pump  

Ф42X1 

136 L/min 

Ф48X1 

206 L/min 

Ф48X1 

250 L/min 

Outlet 

1 x 1/4" 

1 x 1/4" 

1 x 1/4" 

Wheels 

4.5" 

6" 

6" 

Max Pressure 

800 kPa / 8.0 Bar 

800 kPa / 8.0 Bar 

800 kPa / 8.0 Bar 

 
 

Summary of Contents for 150-02-50222















Reviews: