2
Introduction
Dear Customer,
Thank you for purchasing this compressor which has passed through our extensive quality assurance processes. Every
care has been taken to ensure that it reaches you in perfect condition. However, in the unlikely event that you should
experience a problem, or if you require any assistance please do not hesitate to contact us;
ROK Compressor Warranty
You are not required to do anything to register your compressor purchase. Please attach the purchase receipt to this
manual and ensure both are kept safe.
ROK Power Tools warrants that this compressor will be free from manufacturing faults or defects for 12 months from the
date of purchase, providing original purchase receipt is kept and shown when needed and is subject to the terms and
conditions below.
What is covered.
Manufacturing fault or defect.
How to claim under this warranty.
Call customer service on 07 3906 2920
o
Ensure you have the following;
Original purchase receipt.
Model of compressor.
Discuss the issue.
Customer service will advise what action to take.
What is not covered.
Commercial use of compressor.
Use of compressor in a commercial premises.
Damage or deterioration due to transport.
Damage caused by negligence, misuse, abuse or accident.
Any corrosion or rusting.
Damage caused by incorrect set up and start up.
Replacement parts due to general wear and tear.
Compressors with modification.
Compressors which have been serviced by other than an authorised service agent.
Compressors with no original purchase receipt.
Compressors which have been on sold, not original purchaser.
Damage due to non-servicing of compressor as is required by this manual.
Blockages / damage caused by dust, dirt, spider webs or insects.
Damage caused by the incorrect fitting of accessories.
Damage caused by overloading, overworking the compressor.
Damage to attached equipment or third party accessories.
Damage caused by attached equipment or third party accessories.
Lubrication of Compressor
Before attempting to operate this air compressor the dust cover must be removed, thrown out and replaced with the oil
breather. Check the oil level to ensure the level is to the top of the red mark on the sight glass; refer to page 8 for
complete details and diagram. Failure to do this may result in damage to the air compressor and / or injury to the user.
PLEASE follow the instructions noted on page 8 on changing the dust cover to the oil breather.
Assembly
This compressor MUST be fully assembled by you prior to use. Failure to do so will result in the warranty being VOID.
Failure to fully assemble this compressor may also result in personal injury.
Safety
Before attempting to operate this air compressor the following basic safety precautions should be taken to reduce the risk
of fire, electric shock and personal injury. It is important to read the instruction manual and to understand applications,
limitations and potential hazards associated with the air compressor. This air compressor is not intended for use by
