ROJONE Pty. Ltd – 61 Aero Rd, INGLEBURN NSW 2565 AUSTRALIA
TEL +61 02 9829 1555 FAX 02 9605 8812 EMAIL [email protected]
5
6.0
SPECIFICATIONS
All specifications are Preliminary and are subject to change.
6.1
DC CHARACTERISITICS
Input Voltage
12 to 24 VDC with Negative Earth.
DC Current
Standby
10 mA @ 12V ( 8 mA @ 24V)
Tow Away Mode ON 35 mA @ 12V (25 mA @ 24V)
Maximum
200 mA @ 12V (150 mA @ 24V)
Reverse Polarity Protection
Series Diode
Over Voltage Transient
Shunt
Battery Backup Input
Same as Input Voltage Volts DC
Operating Temperature
-20 to +60
Degrees Celcius
A vehicle’s power supply system should be regularly checked and maintained for reliable performance. Less
frequently used systems should be backed up using a solar charger.
6.2
MECHANICAL
DIMENSIONS
LENGTH
115 mm
WIDTH
61 mm
HEIGHT
35 mm
WEIGHT
800 grams
MATERIAL
Electro-less Nickel Plated Aluminium extrusion
MOUNTING
The unit can be quickly and easily mounted using cable ties. Be sure to locate the unit in a dry place out of
direct sunlight and high temperatures with good ventilation. The cable end should be orientated away from any
possible water source.
WATER PROOFING
The water proofing supplied with the EziTraK™ kit consists of 2 plastic boots,
some silicon grease, cable ties and a water absorbing Desiccant Bag. The unit is must NOT be immersed in
water but will survive a moist environment if properly installed and maintained.
