rojaflex WSR-15, Original Assembly And Operating Instructions

Page: 9 / 12

1. Programming mode - radio receiver or radio motor
Set the receiver (external Rojaflex radio receiver or Rojaflex radio motor), on which the wall transmitter is to
be programmed, to programming mode (see receiver instructions).
2. Programming the wall transmitter - WSR-15
Each keystroke must be executed within 4 seconds!
Otherwise, the system automatically exits the programming mode.
Set the receiver (motor /
external receiver) to program-
ming mode according to the
instructions.
Select the desired channel by
pressing the K1 (or K2) key
(the channel highlighted in
black is selected).
The group function can
separately as a channel!
Press the P2 programming
key twice.
Press the UP key once.
The motor (shutter) briefly
moves UP/DOWN and/or the
receiver beeps.
OK!
First code programming
successfully performed.
To program additional recei-
vers, start from the begin-
ning.
P P P
Then check the function by pressing the UP / STOP / DOWN keys.
If the direction of rotation of the motor is reversed (roller shutter / motor moves downwards when
the UP key is pressed), please start from the beginning and press the DOWN key after the P2 key
instead of the UP key!
This changes the direction of rotation of the motor.
Changing the direction of rotation of the motor is only possible, depending on the motor
type, if the end positions of the motor have not yet been programmed!
www.rojaflex.com
9
Programming and settings