rojaflex WSR-15, Original Assembly And Operating Instructions

Page: 6 / 12

Inserting the battery / changing the battery
The battery is (depending on the transmitter model) supplied loose or already installed and secured against
discharge with a protective foil. Open the battery compartment by turning the cover (e.g. with a coin),
remove the protective film and insert the battery into the battery compartment with the + (plus) side facing
up.
Then close the battery compartment again.
*With the “DIP” switch, depending on the
radio receiver (see receiver instructions),
you can choose between
“SI” (single = one-way communication)
and ”BI“ (two-way communication) - radio.
SI BI
Op
en
-
Cl
os
e
UP
Battery com-
partment
DIP switch*
Single / Bi -
Directional
Orientation
guide
not docu-
mented
not documented
Wall Transmitter WSR-
15 Backside
P
15-channel wall transmitter WSR-15
UP
P2
DOWN
K2
STOP
K1
The K1 and K2 keys can be used to switch between the individual channels (1-15).
The channel highlighted in black is active in each case.
As soon as the “ a ” (after channel display 15) is highlighted, group control is active.
All programmed receivers are controlled simultaneously.
The key assignment may differ depending on the model:
K1= K- (minus) / K2 = K+ (plus)
6
www.rojaflex.com
Function overview / changing the battery
Depending on the frequency of switching
operations, we recommend replacing the
battery at least every 2 years.
Please do not dispose of batteries in
household waste! Take them to an
appropriate disposal station.
ATTENTION!
Do not swallow the battery!
Danger of chemical burns!