rojaflex RVS-01, Original Assembly And Operating Instructions

Page: 7 / 12

www.rojaflex.com
7
Technical data
Input voltage 3 V DC (batteries 2 x AAA)
Transmit frequency 433.05 - 434.79 MHz
Operating current ≤ 20 mA
Quiescent current ≤ 30 μA
Standby consumption ≤ 0.1 mW
Transmitting power ≤ 10 mW
Protection class IP 44
Permissible temperature range - 20 °C to + 50 °C
Adjustment range wind speed 9 levels (level 0 = programming mode)
Range approx. 30 m*
Channels 1-channel
Compatibility Rojaflex radio awning motors (type ELFIM-45M) and receiver REHK-BI
Dimensions 150mm x 41mm x 26mm
Scope of delivery
After unpacking, please compare the package contents with
the information on the scope of delivery in these instructions.
1. Vibration sensor RVS-01
2. Instruction manual
1. 2.
Art. No. 1000018670
* Range data are approximate values and depend on the structural conditions.
The sensor must be mounted on the drop profile of the awning.
ABS
Mounting
1. Attach the rear cover (base) to the outside (left or right) of the front of the drop-out profile. Arrow
must point upwards.
2. Click the control unit into the housing.
3. Slide the housing onto the base.
It is essential to observe the permissible
wind class for the sun shading system!
Technical data / scope of delivery / mounting