rojaflex RVS-01, Original Assembly And Operating Instructions

Page: 6 / 12

6
www.rojaflex.com
1. Slide on the rear cover from the side.
2. Remove the control unit from the housing.
Functional Description:
P2 key = Programming
Trimmer = Set sensitivity
0 = Programming mode
1 = high sensitivity
9 = low sensitivity*
1 = Batteries (2 x AAA)
Pay attention to correct pola
rity!
2
= Beeper
ATTENTION!
The magnet must be in the specified position
when the sensor is assembled!
The sensor beeps when the housing is closed to
signal activation.
3 = Magnet for Readkontakt
* for folding arm awnings we recommend a
setting of max. level 3.
Please observe the instructions for the aw
ning observe!
NOTICE:
If the battery voltage drops below 2.2 V, the sen-
sor beeps at intervals of approx. 5 seconds.
Risk of fire or explosion if the battery is repla-
ced by an incorrect type!
ABS
3
The RVS-01 is a battery-powered vibration sensor for motorized awnings.
Incoming wind generates vibrations at the drop profile of the awning.
The sensor can be set to 9 sensitivity levels and sends a retract command to the previously taught-in
receiver when the preset sensitivity level is reached (see technical data for compatible receivers).
1
23
4
5
6 7
8 9
0
+
+ -
-
P2
Trimmer
2
1
1
Function overview