manualshive.com logo in svg

rojaflex MLL-80 NHK, Original Assembly And Operating Instructions

Share
Download
rojaflex MLL-80 NHK Original Assembly And Operating Instructions Download Page 2

2  

    

www.rojaflex.com

MLL series 

Tubular motor with 

mechanical limit switches 

and emergency manual 

operation 

MLL-80/15 NHK

 

Safety instructions ............................................................ 3-6
Technical data / scope of delivery ................................... 7

Mounting 
Prepare assembly .................................................................. 8
Mounting the motor ......................................................9-10
Electrical connection................................................... 11-12

Setting the end positions (end points) ................. 13-15
Mount crank eyelet ...................................................... 16-17

Troubleshooting / FAQ ......................................................18
Declaration of Conformity ...............................................19

Contact information ...................................................... Back

CONTENTS

Content

Art.-Nr.
MLL-80/15 NHK 

90100018

ATTENTION!  

After unpacking, compare the device type with 
the corresponding information on the type plate. 
Incomplete devices or devices that do not comply 
with the specifications must not be put into 
operation and a complaint must be lodged with 
our customer service department (see contact 
information) before commissioning.

Summary of Contents for MLL-80 NHK





















Reviews:

No comments

Brands by name

Popular brands

Load more brands