RP248CN User’s and Installer’s Manual Page
4
CHAPTER
3
–
S
YSTEM
F
UNCTION AND
O
PERATION
3.1 Depress Keys Audible
When depress any keys, keypad will emit a brief deep.
After any successful operation the keypad will emit a long beep to confirm. And after error
operation, the keypad will emit three brief beep warn.
When arming, the keypad(s) will beep until the end of the exit delay time.
When trigger an armed zone, the keypad will beep until end the entry delay time. The
system must be disarmed, if not, it will be triggered.
If zone(s) programmed as door chime function, when triggered the zone(s), keypad will
emit three short beeps.
When use keypad for panic alarm, fire alarm and special emergency, there will be a brief
beep.
When triggered alarm, keypad will emit a beep for confirming.
It will not change the setting for siren/bell after change the buzzer setting on the keypad.
3.2 Door Chime
Each keypad can emit a continuous brief sound, called as
DOOR CHIME
. If you set the door
chime function, the keypad will emit a door chime sound when the door or window is opened.
Turn on/off the door chime by operation [*]+[4]+[[5] or [6].
3.3 The numeric keys and character relative form
Program as the following:
1. The Key [
←
] and [
→
] are used move the cursor to the left or to the right.
2.
Key in the character as the above form, such as depress [1] twice to entry the “A” and
depress [2] four times to entry the “P”.
3. After entry one character, move the cursor to entry other one by Key [
←
][
→
].
4. After program, depress [#] to confirm, or depress [*] to cancel.
3.4 Digit Keys and Functions Keys
The Keys can support the following functions:
1. Entry digit(s) for arming, disarming, panic alarm, programming system etc.
2. Entry user’s function mode.
3. Key [ARM] is for quick arming and code Arming.
4. Key [STAY] is for quick stay arming and code stay arming. Each zone can be set as
interior zone or external zone. When use
[STAY]
for arming, the external zone is armed
while leaves the interior zone disarmed.
5. Under the disarmed status, depress [*] to entry user’s function mode.
Reference to
CHAPTER 1- SUMMARY of USER’S COMMANDS
3.5 Modifying/ Setting and Deleting Code
The Master Code of RP248CN could be set as four or six digit code. The default master
code is 1-2-3-4. Unless your alarm company has already changed it to suit your preference,
it’s best to modify this code to one which is unique and personalized. RP248CN can set a
great deal of codes, one is master code and others are users’ code. The system code can
be set under the disarm state.
Functions of the Master Code:
Change the master code
Distribute, delete and change the system user’s code.
Access to all zones.
Bypass
zone(s).
Operation
and
testing.
Setting the follow-me numbers
Turn on the buzzer.
Turn off the buzzer.
Keys
1 A
B
C
D E F G H
I
J
K
L
M
2 N
O
P
Q
R
S
T
U
V
W
X
Y
Z
3 ! “
&
‘ : - ? .
/
(
)
[
]
4 a
b
c
d
e
f
g
h
i
j
k
l
m
5 n
o
p
q
r
s
t
u
v
w
x
y
z
6
7
8
9
0
