RP248CN Users and Installer’s Manual
Page 34
USER FUNCTIONS
Hot Key
Display
Explanation
1. BYPASS
1.1 BYPASS
ZONES
Provides the ability to bypass any
of the system's intrusion zones, as
described on page 34.
1.2 BYPASS
RESET
Removes any bypass(es)
previously placed on an intrusion
zone(s)
1.3 BYPASS
RECALL
Recalls the most recent zone
bypass(es)
2. ACTIVITIES
2.1 UTIL
OUTPUT
Allows user control of previously
designated extemal devices, as
described on page 36
2.2 SWITCH
AUX
Interrupts the power supplied to the
system's smoke detector(s) for a
predetermined interval. thus
resetting and "readying" them for
subsequent alarms, as described
on page 33.
2.3 TERMINATE
FM
If Follow-Me phone No. were
chosen, their operation can be
terminated. use this function when
an alarm has been tripped and
there is no nned to utilize the
Follow-Me phone call.
2.4 INITIATE
CALL
By initiating a call to you’re alarm
company, this allows them to
perform a remote programming
operation on your system
2.5 HAND
OVER
Similar in intent to Initiate Call
(above), Hand Over
allows your alarm company to call
you and, during
the call, "hand over" to them the
control of your
security system
2.6
VOID REP PRG
For installer use only.
Some protocols have a report code
to the
monitoring station for entering and
exiting the
installer programming. To avoid the
entering report
and save time, this function
postpones the report
for two minutes during which the
installer can
enter the programming menu and
no report will be
made.
2.7 FM
PHONES
Allows the entry and/or editing of
any phone
numbers used with the Follow-Me
feature. In case
of an alarm, your system will
generate a telephone
call to a designated system phone
or pager user
and, when connected to the Voice
module,
employ voice messages to
announce the event that
has occurred. Refer to the Voice
Module
Programming and Operations
Manual for more
information.
Refer to page 38 for details about
editing
Follow-Me numbers.
2.8 ENABLE
U/D
Each time this function is enabled,
your alarm
company may subsequently gain a
single remote
access to your system to make any
required
programming changes.
Contact your dealer for additional
information.
2.9
DEL RMT MSG
Deletes a message that has been
sent to the LCD
from the Upload/Download
software.
2.0 CANCEL
REPORT
Sends a "Cancel Alarm" report
message to the
Central Station. This function is
used if the alarm
was activated by mistake
3.VIEW
