42
Correct the data as requirement including power trouble, switch
On/Off. Click "OK" to save and exit.
Select the configuration column again to correct other data, such as
the detector setting, phone/partition setting, and switch On/Off
setting, other setting, code setting, etc.
After corrected all of the data, select the columns need to change, and
then click Send to upload. As Figure 22.
After upload, the system will remind whether to reset the iDo218CN.
If need to continue, please click No; otherwise, If click Yes,
iDo218UD will stop the dialing and set remote management switch
Off.
Fig.22
i
Wireless Alarm System
Do218
