ROHS QH-NVR User Manual Download Page 71

Page: 71 / 107

Network Video Recorder User Manual

shown below:

Fig 5-5

[Sub Stream]:

Sub-stream is SD channel with low frame rate for every channel, it requires

low network bandwidth.

[All to Sub Stream]:

Set all channels as sub-stream.

[Enable Audio]:

Enable or disenable the sound of live video.

[Full Screen]:

Display the video in full-screen, and the tool bar will be hided; double-click

left mouse button or click right mouse button to exit full screen mode.

[Zoom in]:

Select the magnification to amplify the video. Hold the left mouse button to

view the video.

5.3 Remote Playback & Backup

5.3.1 Time Search

Click “SEARCH” button to enter the time search interface, as shown in Fig 5-6.

Step1

: Select a certain date and channels which need to search video.

Step2:

Press Search button, the searched record information will be displayed in the

data information panel.

Step3:

Set the screen display mode and playback start time.

Step4:

Click Play button to playback video from the selected time.

Step5:

Click the relevant buttons on the screen to control playback (such as pause,

rewind, fast forward, stop, single-frame playback, change channel mode, research, etc).

As shown in Fig 5-7.

Summary of Contents for QH-NVR












































































































Search results

Summary of Contents for QH-NVR

Reviews:

Related manuals for QH-NVR

Brands by name

Popular brands

ROHS QH-NVR, User Manual

Search results

Summary of Contents for QH-NVR

Reviews:

Related manuals for QH-NVR

Brands by name

Popular brands