ROHS ITX-i2705 User Manual Download Page 51

Page: 51 / 84

- 44 -

BIOS

- 44 -

Boot Other Device

It allows the system to search for an OS from other devices other than the

ones selected in the First/ Second/ Third Boot Device.

Setting: Disabled, Enabled (Default).

First/ Second Boot Device

These fields determine the drive that the system searches first for an operating

system. The options available include

Setting: Floppy, Hard Disk, CDROM, USB-FDD, USB-ZIP,

USB-CDROM, LAN and Disabled.

Boot Up NumLock Status

It allows you to activate the NumLock function after you power up the

system.

Setting: Off, On (Default).

Security Option

It allows you to limit access to the System and Setup.

When you select System, the system prompts for the User Password every

time you boot up.

When you select Setup, the system always boots up and prompts for the

Supervisor Password only when the Setup utility is called up.

Setting: Setup (Default), System.

APIC Mode

APIC stands for Advanced Programmable Interrupt Controller.

Setting: Disabled, Enabled (Default).

Quick Power On Self Test

When enabled, it speeds up the Power On Self Test (POST) after the system

is turned on.

If it is set to Enabled, BIOS will skip some items.

Setting: Disabled, Enabled (Default).

Summary of Contents for ITX-i2705




















































































Search results

Summary of Contents for ITX-i2705

Reviews:

Related manuals for ITX-i2705

Brands by name

Popular brands

ROHS ITX-i2705, User Manual

Search results

Summary of Contents for ITX-i2705

Reviews:

Related manuals for ITX-i2705

Brands by name

Popular brands