ROHS ITX-i2705 User Manual Download Page 46

Page: 46 / 84

- 39 -

BIOS

- 39 -

The Award BIOS provides a Setup utility program for specifying the system

configurations and settings. The BIOS ROM of the system stores the Setup

utility.

When you turn on the computer, the Award BIOS is immediately activated.

Pressing the <Del> key immediately allows you to enter the Setup utility. If you

a little bit late press the <Del> key, POST (Power On Self Test) will continue

with its test routines, thus preventing you from invoking the Setup.

If you still wish to enter Setup, restart the system by pressing the ”Reset”

button or simultaneously pressing the <Ctrl>, <Alt> and <Delete> keys. You

can also restart by turning the system Off and back On again.

The following message will appear on the screen:

Press <DEL> to Enter Setup

In general, you press the arrow keys to highlight items, <Enter> to select, the

<PgUp> and <PgDn> keys to change entries, <F1> for help and <Esc> to

quit. When you enter the Setup utility, the Main Menu screen will appear on

the screen. The Main Menu allows you to select from various setup functions

and exit choices.

3.2 BIOS Setup

Summary of Contents for ITX-i2705




















































































Search results

Summary of Contents for ITX-i2705

Reviews:

Related manuals for ITX-i2705

Brands by name

Popular brands

ROHS ITX-i2705, User Manual

Search results

Summary of Contents for ITX-i2705

Reviews:

Related manuals for ITX-i2705

Brands by name

Popular brands