2.3 Security
notices
For safe handling of the welding torch the following security notices
should be noted:
Welding operations should only be performed and performed by pro-
fessional personel who have knowledge of the relevant regulations
of arc welding.
Personel should wear dry protective cloth and eye protection.
Welding operations should not be performed in potential explosive
environment.
Personel with pacemaker or other medical implant should not
perform operations with TIG-arc welding equipment.
The TIG-welding torch and – hose and cable package should be
checked on outside visible damages. A damaged welding torch
should not be put in operation.
Check the orderly state of the power source and the cooling unit as
well as the function of the remote control elements before starting
the operation.
Repair of the welding torch or of the connection lead should only be
made by an authorized professional shop or by the factory service.
Substancial dangers for the user might occur by inexpertly repairs.
Defect parts should only be exchanged by original Rohrman compo-
nents. Only these parts may garantee the security requirements.
The welding torch should be put aside so that no contact with current
conducting parts may occur.
During maintenance and cleaning the power source should be turned
off.
The torch package should not be put over hot or sharp edges.
Safety
9
BA_WIG-Brenner_GB_BA-WIG-GB 04.11.14 16:32 Seite 9
