Starting the operation
22
5
Starting the operation
5.1
Assembly of gasnozzle and tungsten electrode
Eventually shorten the tungsten and grind it pointed, as described
in
chapter 7.3 grinding of electrode
.
Electrode assembly as described in
chapter 7.4.2 Exchange of elec-
trode
.
Select and assemble gasnozzle as described in
chapter 7.4.1 gasnozzle
exchange
.
WARNING
Danger of injury during start-up!
With faulty procedure during the start-up of the welding torch
danger of injury exists.
Shut off the additional units and close gas entrance before
starting-up the power-source.
The alloy of tungsten electrode should be determinated acc.
EN ISO 6848. The length of electrode is dependent on the
torchtype see datasheet.
NOTICE
BA_WIG-Brenner_GB_BA-WIG-GB 04.11.14 16:32 Seite 22
