- 4 -
a) Remove the adaptor from its recharge pin hole .
b) Use the liquid suction attachment as final attachment (6); apply pressure to it to attach it.
c) Push the switch (3) forward to switch the appliance on.
d) Keep the device on with the suction inlet facing down at all times.
e) Pull the switch (3) back to switch the appliance off.
Note: Empty the container immediately after use and wash the filter.
Rinse the container and the filter in cold water and let all parts dry completely before reassembling them.
Recharging the device
Insert the plug of transformer into the power outlet.
Make sure the on/off switch (3) is in OFF position (turned off).
Please recharge the device. During charge the LED lamp will flash, after full charge the LED lamp will
change green color. When the power weak and need charge, the LED lamp also will flash to remind you
the power is weak and need charge.
Let it recharge for at least 2 hours.
If the device is used until the batteries are completely flat, it should then be recharged with a complete
recharging cycle of 5 consecutive hours.
Don’t let the device uncharged for a long time, because the inner accumulators may be damaged.
How to empty the container and clean the filter
Press the opening button (1) and unhook the dust container (5).
Remove the dust filter from the inside of the container and empty the dust container (5).
Clean the dust filter and, if necessary, clean the container and dust filter with clear, lukewarm water.
Let all parts dry completely before you put them back together.
Don’t use the device if the motor filter is broken or worn out.
Note: After an intensive or long use, it is necessary to change the motor filter with a new one.
Other care and storage of device
Before cleaning the device, always remove it from its seat and make sure it has completely cooled.
The device should be cleaned with a dry cloth. Don’t use abrasive detergents.
Only the dust container (5) and the dust filter can be washed in cold water. Let the parts dry completely
before reassembly.
Do not immerse the body of the appliance, Power supplier in water or other liquids.
Do not wash any components of the appliance in the dishwasher.
Troubleshooting
If the device should stop working properly, first check whether you are able to correct the problem
yourself. Otherwise, contact our customer service department
Do not try to repair a faulty device yourself!