5 | Assembly
68 / 91
DURO-A RC
5
Assembly
WARNING
Injuries due to insufficient securing on assembly, incorrect
tightening torque of the screws.
Crushing due to falling of the power chuck.
Ø
Use tapped holes for transport purposes.
Ø
Wear personal protective equipment.
Ø
Observe tightening torque of the screws.
WARNING
Crushing injuries and cuts due to start-up during set-up work.
Flying parts may cause serious injuries.
Ø
Disconnect the power supply before assembly.
Ø
Protect the machine against being re-started.
Ø
Wear personal protective equipment.
5.1
Personal Protective Equipment Power Chuck
When working on and with the power chuck DURO-A RC, personal protective
equipment must be worn. The owner is responsible for providing personal pro-
tective equipment.
▪ Personal protective equipment must be in perfect condition when carrying
out work. Defective safety equipment is to be replaced immediately.
▪ Observe information on personal protective equipment posted in the work-
ing area.
▪ During
rotational operation
of the power chuck DURO-A RC,
no
protect-
ive gloves are to be worn! Hand protection is only to be worn during trans-
port, assembly and maintenance and as long as the machine and the
power chuck DURO-A RC are at a standstill.
Wear protective gloves
Wear safety goggles
Wear safety shoes
Summary of Contents for DURO-A RC
Page 2: ......
