background image

 

 

1/30 

www.rohm.com 

2010.05 - Rev.B

© 2010 ROHM Co., Ltd. All rights reserved. 

Middle Power Class-D Speaker Amplifiers 

Class-D Speaker Amplifier 
for Digital Input 

BD5446EFV 

 
 

Description 

BD5446EFV is a Class D Speaker Amplifier designed for Flat-panel TVs in particular for space-saving and low-power 
consumption, delivers an output power of 20W+20W. This IC employs state-of-the-art Bipolar, CMOS, and DMOS (BCD) 
process technology that eliminates turn-on resistance in the output power stage and internal loss due to line resistances up 
to an ultimate level. With this technology, the IC can achieve high efficiency of 87% (10W+10W output with 8

 load). In 

addition, the IC is packaged in a compact reverse heat radiation type power package to achieve low power consumption 
and low heat generation and eliminates necessity of external heat-sink up to a total output power of 40W. This product 
satisfies both needs for drastic downsizing, low-profile structures and many function, high quality playback of sound system. 

 
 

Features 

  1)  BD5446EFV has two system of digital audio interface

.

 

  

(I

2

S/LJ format, SDATA: 16 / 20 / 24bit, LRCLK: 32kHz / 44.1kHz / 48kHz, BCLK: 64fs (fixed), SYS_CLK: 256fs (fixed))

 

  2)  Within the wide range of the power supply voltage, it is possible to operate in a single power supply. (10~26V) 
  3)  It contributes to miniaturizing, making to the thin type, and the power saving of the system by high efficiency and low heat. 
  4)  S/N of the system can be optimized by adjusting the gain setting among 8 steps. (20~34dB / 2dB step) 
  5)  It has the output power limitation function that can be adjusted to an arbitrary output power. 
  6)  The decrease in sound quality because of the change of the power supply voltage is prevented with the feedback 

circuitry of the output. In addition, a low noise and low distortion are achieved. 

  7)  It provides with the best stereo DAC output for the headphone usage. As a result, the output of the selection of the 

digital input in two systems is possible. 

  8)  Eliminates pop noise generated when the power supply goes on/off, or when the power supply is suddenly shut off. 

High quality muting performance is realized by using the soft-muting technology. 

  9)  BD5446EFV is a highly reliable design to which it has various protection functions.   
 

  (High temperature protection, Under voltage protection, Output short protection, Output DC voltage protection and 

Clock stop protection) 

 
 

Applications 

Flat Panel TVs (LCD, Plasma), Home Audio, Desktop PC, Amusement equipments, Electronic Music equipments, etc., 

 
 
 

 

No.10075EBT14

www.DataSheet4U.com

Summary of Contents for BD5446EFV
































Reviews: