Rohde TC 304, Instruction Manual

Page: 17 / 72

55
ENGLISH
Quick Start Guide
Starting a program
1. Power on, the mains switch is located on the bottom of
the housing, the actual temperature is shown on the display.
2. Push the prog key once or several times to call a program.
First, the program number appears on the display, then the
end temperature is indicated.
3. Start or stop the selected program using the “Start / Stop”
key.
Note:
check the set program values before each program
start.
Changing a program
1.– 2. See above
3. Use the
S
or
T
key to select program sections.
4. Change selected program section values using the
X
or
W
key. The values are saved automatically.
5. Start or stop the selected program using the “Start / Stop”
key.
Saving a program
The TC 304 automatically saves all the variable values of
the fi ring curve.