Rohde TC 304, Instruction Manual

Page: 15 / 72

33
ENGLISH
Introduction
You have chosen a TC 304 control unit, a high-quality product. This controller series
incorporates the latest technological features and is the leader in its class.
After reading this manual you will be familiar with the functionality of the TC 304
controller. Please make sure that you fully understand the kiln manufacturer’s safety
instructions.
Make sure that the controller is mounted at a safe distance from the kiln and is not
exposed to direct heat from exhaust air or radiation from the kiln.
Operating Elements
1 Actual value display
2 Units/values indicator
3 t0 program delay section
4 Rmp1 1st heating rate program section
5 Tmp1 1st switching point program section
6 Rmp2 2nd heating rate program section
7 Tmp2 end temperature program section
8 t2 dwell time at end temperature program section
9 Rmp3 cooling rate program section
10 End of program indicator
11 Key to select programs 1-5
12 Back key
13 “Start/Stop” program key
14 Change current value +
15 Advance key
16 Change current value –
17 Power on /off
1
7
6
5
4
3
12
13
2
8
9
10
11
14
15
16
17