ZN-Z8x User Tool
R&S
®
ZN-Z84
53
User Manual 1319.5413.02 ─ 02
A
ZN-Z8x User Tool
The "ZN-Z8x User" tool offers the following functions:
●
Connect to a R&S
ZN-Z8x switch matrix via USB
– Select a detected switch matrix
– Read its identification parameters (extension type, serial number, firmware
version)
●
Create and delete routes manually
●
Send SCPI commands and read the responses
●
Read and modify LAN Settings
●
Read and modify LED settings for the available RF ports
●
Monitor system parameters:
– FPGA temperature
– voltages at certain reference points
A.1
Software Installation
The "ZN-Z8x User" tool can be installed on any PC running Windows 7 or higher.
In the current version, Windows XP is also supported.
In addition to the requirements imposed by the operating system (e.g. see
), you will need a spare USB port to establish a
physical connection to the switch matrix.
Installation of the software is completely self-explanatory: run the
setup.exe
and follow the instructions of the installation wizard.
If not already available on the target PC, the wizard attempts to install the
R&S
ZN-Z USB BULK driver, which requires administrative priviledges.
Software Installation
